To use the granule packaging machine well, what should I pay attention to? After many years of development experience, I found that it should be done: the multi-line packaging machine is compared in terms of function, configuration, and various aspects. The difference is relatively large. Choose the granule and powder packaging suitable for the company's products The machine is the key to production output and packaging quality.
We know that in the current pharmaceutical industry alone, as long as it produces proprietary Chinese medicines, there are generally granular formulations, and a few powders are available. It is very unsuitable for these products to use manual packaging. The use of advanced machinery can not only increase production, but is also very meaningful for saving manpower and material resources.
The granule packaging machine is divided into the sealing method, which can be divided into the plywood type and the roller type. In terms of production capacity, it can be divided into single-row machines and multi-row machines.
It can be divided into vertical machine and horizontal machine from the way of film walking. At present, the main forms of pouch packaging are: three-side seal, four-side seal, and back seal.
What are the maintenance points of the pellet packaging machine?
1. When the roller moves back and forth during work, please adjust the M10 screw on the front bearing to the proper position. If the gear shaft moves, please adjust the M10 screw on the back of the bearing frame to the proper position, adjust the gap so that the bearing does not make a noise, turn the pulley by hand, and the tightness is appropriate. Too tight or too loose can cause damage to the machine. .
2. After the device is used or stopped, the rotating drum should be taken out to clean and brush the remaining powder in the hopper, and then install it, ready for the next use.
3. During the service life of the pellet packaging machine, the staff should check the parts regularly, once a month, check whether the worm gear, worm, bolts on the lubricating block, bearings and other movable parts are flexible and worn. If any defects are found, they should be repaired in time , Don’t use it reluctantly.
The powder packaging machine is made to meet the needs of social and industrial development. With the development of life, people's quality of life is constantly improving. This embodiment is not only reflected in the changes in products, but also has very high product safety standards.
