Now as labor costs more and more expensive, heavy enterprises have begun to use fully automated packaging machinery to replace manual, automatic powder packaging machine is mainly for the powder quantitative packaging materials and design a device, it can finish bag making, quantitative filling to sealing and a series of operations, before using semi-automatic powder packaging machine need someone responsible for material and sealing, And now a fully automatic powder packaging machine can finish all the work, it greatly improved the production efficiency, and reduce the production cost. But everything has two sides, because it has a more complex mechanical structure, sound and photoelectric system integration is higher, so the probability of failure of automatic powder packaging machine is larger than semi-automatic products, because many enterprises do not have professional technical personnel, this problem may directly affect the production activities of these manufacturers, So today to summarize the multi line powder packaging machine 5 kinds of common failures and solutions.
Fault one: color calibration position fault
Fault description: automatic powder packaging machine in operation when cutting position may appear larger deviation, bags with color code in the middle of the gap is too big, color calibration is out of order and photoelectric tracking compensation is out of control.
Solution: in this case, you can first try to adjust the position of the photoelectric switch. If not, you can clean the molding machine, insert the packaging material into the lead plate, adjust the position of the guide board, so that the light spot is just in the middle of the color code.
Fault two: the paper motor does not rotate or does not rotate under control
Fault Description: During the operation of the automatic powder packaging machine, the motor for paper supply may be stuck, resulting in the motor not running, or the motor can not rotate under control due to the damage of the starting capacitor, which are very common faults.
Solution: First check whether the paper supply control lever is stuck, whether the starting capacitor is damaged, whether the safety tube is wrong, and then replace according to the inspection results.
Fault three: loose sealing
Fault description: Automatic powder packaging machine seal lax, this phenomenon will not only waste materials, but also because the materials are powder, easy to spread, pollution automatic powder packaging machine equipment and workshop environment.
Solution: Check whether the packaging containers meet the relevant regulations, remove fake packaging containers, and then try to adjust the sealing pressure and increase the heat sealing temperature.
Fault four: do not pull the bag
Fault description: Automatic powder packaging machine does not pull bag, pull bag motor chain, the cause of this fault is nothing more than line problems, bag proximity switch damage, controller failure, step motor driver problems.
Solution: Check whether the bag proximity switch, controller and stepper motor are damaged, and replace the damaged parts.
Fault five: Tear the packaging bag
Fault description: In the operation process of automatic powder packaging machine, packaging containers are often torn off by automatic powder packaging machine.
Solution: check the motor line problem to see if the close switch is damaged.
