What do we need to pay attention to when using pellet packing machine? After years of development experience found, should do this: multi-column packaging machine from the function, configuration, all aspects of comparison, the difference is relatively large, choose suitable for the enterprise's products of particles, powder packaging machine is the key to production output and packaging quality.
Granule packing machine can be divided into splint type and roller type from the sealing way. From capacity to points, can be divided into single column machine and multi - column machine.
From the way to go, can be divided into vertical machine and horizontal machine. At present, the main form of small bag packaging is: three side seal, four side seal, back seal.
1. When the roller moves back and forth during work, please adjust the M10 screw on the front bearing pawn to the appropriate position. If the gear shaft moves, please adjust the M10 screw behind the bearing frame to the appropriate position, adjust the clearance so that the bearing does not sound, hand turn the pulley, appropriate tightness is appropriate, too tight or too loose can make the machine may damage.
2. After use or stop, remove the rotating drum for cleaning and brush the remaining powder in the bucket, and then install it, ready for the next use.
3. During the service period of the particle packaging machine, the staff should regularly check the parts, once a month, check whether the worm gear, worm, bolts on the lubrication block, bearings and other active parts are flexible and wear, find defects should be repaired in time, not forced to use.
Powder packaging mechanism is to adapt to the needs of social and industrial development. With the development of life, the quality of people's life is constantly improving. This is not only reflected in the changes of goods, but also very high safety standards for goods.
