Tea packaging machine general adjustment mode indicates
With the development trend of economic development and the improvement of everyone's living standard, the development trend of tea leaves in China is rapid. In this situation, tea packaging machine has an opportunity to present itself. In response to the hot summer, the sales of tea leaves are in full swing, but one after another encountered the problem of tea leaves storage, tea leaves packaging increasingly looks key. With the change of time, these unfavorable tea leaf storage packaging will eventually be replaced by the sales market, and tea packaging machine as tea leaf "good assistant", to help tea leaf to deal with its storage problems.
Tea packing machine belongs to the food vacuum pump packaging machine in the small and medium-sized vacuum pump packaging machine, tea leaf vacuum pump packaging machine equipped with different mold shell can be used to tea leaf forming, it has a lot of position regulation:
1. Limit switch
There is a limit switch in the middle behind the plexiglass plate. If the fuse of the equipment is intact, the key is in the switching power supply part. When the plexiglass plate is not working, you can clamp the limit switch by hand. If the equipment is working, you can get the side plate to adjust the limit switch, so that the plexiglass plate can press the limit switch.
2. Electric heating tube and heating cloth
Electric heating tube seat fitness exercise is easy, you can use your hands to move the wire seat, to avoid both sides of the power plug stuck, if the heating tape wrinkle, can be used after the pressure again, if the tape is bad, should be removed, to prevent harm to the sealing quality.
3. The oil amount
Remove and replace the vacuum pump oil after 800 hours of application of the equipment, and feed the oil to the marked oil volume. If the car oil is usually very high or slightly lower oil level, the vacuum value of the equipment will be affected.
